SOR blues
Posted: Wed Sep 13, 2017 5:59 am
Hello again,
This follows my previous thread http://www.dynoinsight.com/phpBB3/viewt ... f=2&t=3052
In my objects Color is off as you will see. Also, on the gear hub, instead of sharp corners, I have rounded corners.
See the circled area in the wireframe below: it is sharp
When the lines are hidden (Surface mode), the corners appear rounded.
Regards, Jeff
This follows my previous thread http://www.dynoinsight.com/phpBB3/viewt ... f=2&t=3052
In my objects Color is off as you will see. Also, on the gear hub, instead of sharp corners, I have rounded corners.
See the circled area in the wireframe below: it is sharp
When the lines are hidden (Surface mode), the corners appear rounded.
Regards, Jeff