Problem with union on IGES objects

Forum for reporting problems
Post Reply
Morokaman
Posts: 0
Joined: Tue May 16, 2023 5:50 am

Problem with union on IGES objects

Post by Morokaman »

Hello

I have problem with Boolean union on my objects.

I have attached a test file as MDG. It was created by opening two IGES files, then saving as MDG. Using the BoolOp sample app,
I cannot get these two objects to unite. Thoughts?

Thanks
Mick
Attachments
BollopTest.mdg
(191.3 KiB) Downloaded 900 times

Prashant Kande
Posts: 121
Joined: Mon Apr 04, 2016 4:55 am

Re: Problem with union on IGES objects

Post by Prashant Kande »

Hi

The model does not contain any solids. This must be because iges is only a set of separate faces. This is the main problem with iges. That is why .step is the preferred format to work with.

There is a way to sew up faces into a solid, when they do form a nicely closed surface. Unfortunately, it is unexposed functionality at the moment. Currently it is used only in our Engrave utility. I believe in Engrave it is done automatically on iges load if some flag is set in context.

We have added it as a high priority for v7.2. Please get in touch if is urgent.

Regards

Morokaman
Posts: 0
Joined: Tue May 16, 2023 5:50 am

Re: Problem with union on IGES objects

Post by Morokaman »

Thanks, Prashant

Post Reply