IBSplineSurface_DG Interface
 Init
 Init
 GetAxialSplineProps
 GetPoleMatrixSize
 GetPole
 SetPole
 SetPole
 GetPoles
 GetWeight
 SetWeight
 GetWeights
 GetPoint
 GetNormal
 GetJet1
 GetJet2
 GetJetN
 GetIsoCurve
 ModifyPoint
 SwapUV
IBSplineSurface_DG can be queried from IUVSurface_DG, when the actual surface type, as returned by IUVSurface_DG.GetSurfaceType(),
is ESurfaceType_DG.eSurfTypeBSpline. Example of a query:
IEntity_DG > GetGeometry() > IGeometry_DG >
IBRepGeometry_DG > GetShape() > IBRepShape_DG >
IBRepSolid_DG > GetOuterShell() >
IBRepShell_DG > GetFace() >
IBRepFace_DG > GetSurface() >
IUVSurface_DG > IBSplineSurface_DG.
Bspline surface can also be created standalone (possibly to be attached to a face) using a call similar to:
IObjectGenerator_DG iGen = iModel as IObjectGenerator_DG;
IBSplineSurface_DG iBSsurf = iGen.Create<BSplineSurface_DG<();
Implements also: IUVSurface_DG, IGeometricObject_DG, IObject_DG.
All indices are 0based.
void Init(IPointMatrix_DG poles, IArrayDouble_DG knotsU, IArrayDouble_DG knotsV, IArrayInt_DG multiplicitiesU, IArrayInt_DG multiplicitiesV, int degreeU, int degreeV, bool periodicU, bool periodicV)
Initialises a nonrational bspline surface with weights = 1.
For input to be valid, the following conditions must be met for both U and V components:
0 < degreeU <= MaxDegree(=14 in this version)
knotsU.GetCount() == multiplicitiesU.GetCount() >= 2
knotsU[i] < knotsU[i+1] knots must be increasing
For internal knots 1 <= multiplicitiesU[i] <= degreeU
On a non uperiodic surface the first and last multiplicities are not greater than degreeU+1 (Set them to degreeU+1 to make ends of the iso curve (and edges of the surface) coinside with the the first and the last poles).
On a uperiodic surface the first and the last in multiplicitiesU must be the same.
On nonuperiodic surfaces poles.GetRows() must be equal to Sum(multiplicitiesU[i])  degreeU  1 >= 2
On uperiodic surfaces poles.GetRows() must be equal to Sum(multiplicitiesU[i]), except for the first or the last.
Defaults: periodicU = false, periodicV = false
void Init(IPointMatrix_DG poles, IMatrix_DG weights, IArrayDouble_DG knotsU, IArrayDouble_DG knotsV, IArrayInt_DG multiplicitiesU, IArrayInt_DG multiplicitiesV, int degreeU, int degreeV, bool periodicU, bool periodicV)
Initialises a rational bspline surface.
For input to be valid, the following conditions must be met for both U and V components:
weights.GetRows() == poles.GetRows()
0 < degreeU <= MaxDegree(=14 in this version)
knotsU.GetCount() == multiplicitiesU.GetCount() >= 2
knotsU[i] < knotsU[i+1] knots must be increasing
For internal knots 1 <= multiplicitiesU[i] <= degreeU
On a non uperiodic surface the first and last multiplicities are not greater than degreeU+1 (Set them to degreeU+1 to make ends of the iso curve (and edges of the surface) coinside with the the first and the last poles).
On a uperiodic surface the first and the last in multiplicitiesU must be the same.
On nonuperiodic surfaces poles.GetRows() must be equal to Sum(multiplicitiesU[i])  degreeU  1 >= 2
On uperiodic surfaces poles.GetRows() must be equal to Sum(multiplicitiesU[i]), except for the first or the last.
Defaults: periodicU = false, periodicV = false
IPartialSplineProps_DG GetAxialSplineProps(bool u)
Access to attributes specific for the selected parametric direction
PairIntDg GetPoleMatrixSize()
Returns number of rows (along range of u parameter) in PairIntDg.first and number of columns (along range of v parameter) in PairIntDg.second.
PointDg GetPole(int indexU, int indexV)
The indices must be in [0, GetAxialSplineProps(u).GetPoleCount()1] range.
void SetPole(int indexU, int indexV, PointDg point)
The indices must be in [0, GetAxialSplineProps(u).GetPoleCount()1] range.
void SetPole(int indexU, int indexV, PointDg point, double weight)
The indices must be in [0, GetAxialSplineProps(u).GetPoleCount()1] range.
IPointMatrix_DG GetPoles()
double GetWeight(int indexU, int indexV)
The indices must be in [0, GetAxialSplineProps(u).GetPoleCount()1] range.
void SetWeight(int indexU, int indexV, double weight)
The indices must be in [0, GetAxialSplineProps(u).GetPoleCount()1] range.
IMatrix_DG GetWeights()
PointDg GetPoint(T2DDg uv)
VectDg GetNormal(T2DDg uv)
void GetJet1(T2DDg uv, PointDg point, out VectDg d1u, out VectDg d1v)
Returns point and derivatives at the uv parameters
void GetJet2(T2DDg uv, PointDg point, out VectDg d1u, out VectDg d1v, out VectDg d2u, out VectDg d2v, out VectDg d2uv)
Returns point and derivatives at the uv parameters
VectDg GetJetN(T2DDg uv, int Nu, int Nv)
Returns point and derivatives of the specified order at the uv parameters
ICurve_DG GetIsoCurve(bool u, double paramAt)
If u is true, returns curve v>S(paramAt, v) parametrised by v.
(u, v)>S(u,v) here denotes
the surface mapping as defined by GetPoint() method above.
paramAt must be within the range returned by IUVSurface_DG.GetParameterRange(true,min,max).
The returned curve will have range IUVSurface_DG.GetParameterRange(false,min,max).
Conversely, if u is false, the method returns curve u>S(u, paramAt) parametrised by u.
void ModifyPoint(T2DDg uv, PointDg point, ref int firstIndexU, ref int lastIndexU, ref int firstIndexV, ref int lastIndexV)
Modifes poles in the specified range so that the surface interpolates (passes through) the point.
In other words, moves the point at uv parameters on this surface to new position pt.
The integer parameters are [in,out]. On start they specify the range of the poles which are allowed to be moved.
On return they contain the indexes of the first and last poles, which were actually modified.
void SwapUV()
Exchanges the u and v parametric directions. As a consequence: The pole and weight tables are transposed,
the knot and multiplicity tables are exchanged, degrees of continuity, and rational, periodic and uniform characteristics are exchanged, and the orientation of the surface is inverted.
